More than sensors+automation
Search

Ex (ATEX)

JUMO NESOS R01 LS – Float Switch in Miniature Form (408301)
JUMO NESOS R01 LS – Float Switch in Miniature Form (408301) DNV-GL Ex IECEx EAC Ex EAC WHG Bahn TÜV Süd

  • Point level measurement via floats and reed contact
  • For liquid media unaffected by foam formation, conductivity (permittivity), or pressure ratios
  • Temperature range from -52 to +240 °C
  • Available in numerous versions
  • Approvals and certificates are available for explosion protection, shipbuilding, railway applications, and the Water Resources Act (WHG) as well as a certification for the Pressure Equipment Directive (PED)

JUMO NESOS R02 LS – Float Switch Standard Version (408302)
JUMO NESOS R02 LS – Float Switch Standard Version (408302) DNV-GL Ex IECEx EAC Ex EAC WHG Bahn TÜV Süd

  • Point level measurement via floats and reed contact
  • For liquid media unaffected by foam formation, conductivity (permittivity), or pressure ratios
  • Temperature range from -52 to +240 °C
  • Available in numerous versions
  • Approvals and certificates are available for explosion protection, shipbuilding, railway applications, and the Water Resources Act (WHG) as well as a certification for the Pressure Equipment Directive (PED)

JUMO NESOS R20 LT – Level Transmitter via Float (408320)
JUMO NESOS R20 LT – Level Transmitter via Float (408320) DNV-GL Ex IECEx EAC Ex EAC Bahn TÜV Süd

  • Level measurement via float and reed chain
  • For liquid media unaffected by foam formation, conductivity (permittivity), or pressure ratios
  • Temperature range from -52 to +180 °C
  • Available in numerous versions
  • Approvals and certificates are available for explosion protection, shipbuilding, railway applications, and the Water Resources Act (WHG) as well as a certification for the Pressure Equipment Directive (PED)

ATEX Thermowells for Zone Separation 0/1 or 20/21 (605057)
ATEX Thermowells for Zone Separation 0/1 or 20/21 (605057) China RoHS-e Ex

  • Zone separation 0/1 or 20/21
  • As screw-in sleeve or weld-in sleeve
  • Insertion lengths 100, 150, 200, and 300 mm available directly from the factory
  • Special lengths are available upon request

JUMO dTRANS p20 DELTA - Differential Pressure Transmitter with Display (403022)
JUMO dTRANS p20 DELTA - Differential Pressure Transmitter with Display (403022) China RoHS-20 Ex

  • HART® interface
  • Optional explosion protection Ex ia according to ATEX, GOST-R
  • Linearity 0.07 %
  • Turn down: 1:200
  • Simple operation with rotary knob
  • Characteristic line and display also adjustable for flow measurement

JUMO dTRANS p20 DELTA Ex d - Differential Pressure Transmitter with Flameproof Enclosure (403023)
JUMO dTRANS p20 DELTA Ex d - Differential Pressure Transmitter with Flameproof Enclosure (403023) China RoHS-20 Ex

 

  • HART® interface
  • Ex d explosion protection according to ATEX, GOST-R
  • Linearity 0.07 %
  • Turn down: 1:200
  • Simple operation with rotary knob
  • Characteristic line and display also adjustable for flow measurement

JUMO dTRANS p20 – Process Pressure Transmitter with Display (403025)
JUMO dTRANS p20 – Process Pressure Transmitter with Display (403025) China RoHS-20 DNV-GL Ex Ex NEPSI

  • HART® interface
  • Optional explosion protection [Ex ia] according to ATEX, GOST-R, DNV
  • Linearity 0.05 %
  • Turn down: 1:50
  • Simple operation with rotary knob

JUMO dTRANS p20 [Ex d] – Process Pressure Transmitter with Flameproof Enclosure (403026)
JUMO dTRANS p20 [Ex d] – Process Pressure Transmitter with Flameproof Enclosure (403026) China RoHS-e Ex

  • HART® interface
  • [Ex d] explosion protection according to ATEX, GOST-R
  • Linearity: 0.05 %
  • Turn down: 1:50
  • Simple operation with rotary knob

JUMO dTRANS p02 DELTA Pressure Transmitter with Display (404382)
JUMO dTRANS p02 DELTA Pressure Transmitter with Display (404382) China RoHS-e Ex

Feature: for differential pressure, filling level, and flow

  • 0 to 60 mbar DP to 0 to 25 bar DP
  • Linearity: ≤ 0.1 % of end value
  • Temperature of medium: -40 to +100 °C
  • Load on one and both sides up to a static pressure of 420 bar
  • ATEX approval available as an option

JUMO dTRANS p02 - Pressure Transmitter with Display (404385)
JUMO dTRANS p02 - Pressure Transmitter with Display (404385) China RoHS-e Ex

Feature: for relative pressure, absolute pressure, and level

  • -100 to 100 mbar – -1 to 600 bar relative, 0 to 600 mbar – 0 to 25 bar absolute
  • Linearity: ≤ 0.1 % from end value
  • Long-term stability: < 0.1 % per year
  • Medium temperature: -40 to +200 °C (SIP and CIP capable)
  • ATEX approval available as an option

JUMO MAERA S29 SW - Level Probe out of Titanium (404393)
JUMO MAERA S29 SW - Level Probe out of Titanium (404393) DNV-GL China RoHS-e Ex IECEx

  • Level probe for continuous level measurement in liquids
  • Measuring ranges: 100 mbar to 10 bar (1 mWS to 100 mWS)
  • Medium temperature: 0 to 50 °C
  • Accuracy: 0.3 % MSP (linearity)

JUMO MIDAS S21 Ex - Pressure Transmitter for Use in Ex-Areas (404710)
JUMO MIDAS S21 Ex - Pressure Transmitter for Use in Ex-Areas (404710) China RoHS-20 Ex

  • ATEX approval
  • Measuring ranges from 0.25 to 100 bar relative and absolute pressure version
  • Medium temperature: -40 to +85 °C
  • Accuracy: as of 0.3 % MSP

JUMO dTRANS p33 - Pressure Transmitter or Level Probe for Use in Ex-Areas (404753)
JUMO dTRANS p33 - Pressure Transmitter or Level Probe for Use in Ex-Areas (404753) China RoHS-20 Metrological certification Ex

  • Pressure transmitter or level probe
  • ATEX approval
  • Measuring ranges: 250 mbar to 600 bar relative and 600 mbar to 25 bar absolute
  • Medium temperature: -40 to +85 °C, optionally to 200 °C (SIP and CIP capable)
  • Accuracy: 0.5 % MSP (linearity)
  • Protection type: IP65

Particularly for the level probe variant (IP68):

  • Measuring ranges: 250 mbar to 10 bar (2.5 to 100 mWS)
  • Medium temperature: 0 to 50 °C

Product comparison level probes

JUMO exTHERM-AT (605055) – Explosion-Protected Surface-Mounted Thermostat
JUMO exTHERM-AT (605055) – Explosion-Protected Surface-Mounted Thermostat China RoHS-20 Ex IECEx SIL

  • Can be directly applied in zones 1 and 2 or 21 and 22
  • Switching capacity 16 A as standard, optionally 25 A
  • Admissible ambient temperature: -60 to +70 °C
  • Thermowell for zone 0 available as an accessory
  • Single thermostat and double thermostat

JUMO exTHERM-DR – Two-State Controller with ATEX and IECEx Approval
JUMO exTHERM-DR – Two-State Controller with ATEX and IECEx Approval China RoHS-e Ex IECEx

  • Approval Ex II (1) G [Ex ia Ga] II C, Ex II (1) D [Ex ia Da] III C, Ex II (2) G [Ex eb Gb] IIC, Ex II (2) D [Ex tb Db] IIIC
  • Ignition protection type [Ex ia] with intrinsically safe inputs or [Ex e] with increased safety
  • Controller output (relay)
  • Limit value output (relay) for alarm indication
  • Analog output configurable as actual value output, setpoint value output, or logic output 0/10 V for control of solid state relay
  • LCD display for process information
  • USB interface on front and setup program for simple startup

 

JUMO safetyM STB/STW Ex – Safety Temperature Limiter/Monitor According to DIN EN 14597 and ATEX Approval
JUMO safetyM STB/STW Ex – Safety Temperature Limiter/Monitor According to DIN EN 14597 and ATEX Approval DNV-GL China RoHS-e Ex IECEx SIL DIN DGRL PL EAC Ex

  • Ignition protection type [Ex ia] with intrinsically safe inputs or [Ex e] with increased safety
  • Approval II (1) (2) (3) G (b1) [Ex ia Ga] (e pz] IIC, II (1) (2) (3) D (b1) [Ex ia Da] (p Dc] IIIC, II (1) (1) (2) G (b2) [Ex ia Ga] (e py] IIC, II (1) (1) (2) D (b2) [Ex ia Da] (p DB] IIIC
  • Safety monitor and safety limiter for temperature, pressure, and other process variables
  • Configurable universal input
  • 1oo2D architecture (2-channel structure with diagnostics channel)
  • Approvals according to DIN EN 14597, SIL 3, PL e
  • Security-related limit value relay (230 V, 3 A)
  • Pre-alarm absolute or adjustable as a margin from the limit value
  • Default actual value output
  • Compact solution
  • Ignition source monitoring according to EN 13463 and EN 50495 SIL 2
  • Minimum pressure monitoring SIL 2

JUMO dTRANS T01 - Two-Wire Transmitter (707010)
JUMO dTRANS T01 - Two-Wire Transmitter (707010) Metrological certification China RoHS-e Ex IECEx

  • Designs for B head or DIN-rail mounting
  • RTD temperature probes and thermocouples
  • Galvanic isolation
  • Output two-wire 4 to 20 mA, HART® interface
  • Also available with Ex approval
  • Configuration with setup program

JUMO dTRANS T02 – Four-Wire Transmitter (707020)
JUMO dTRANS T02 – Four-Wire Transmitter (707020) Metrological certification China RoHS-e Ex IECEx

Type 707025 will be discontinued in 2022 with order availability until September 30, 2022 at the latest.

The successor product is the multifunctional four-wire transmitter JUMO dTRANS T06 Ex (data sheet 707075)

  • Design width 17.5 or 22.5 mm
  • Mounting on DIN rail, 35 mm
  • Universal measurement input
  • Galvanic isolation
  • Current output, voltage output
  • Ex and IECEx approval
  • Configuration with setup program 

JUMO dTRANS T07 – Two-Channel Temperature Transmitter with HART®/Ex/SIL (707080)
JUMO dTRANS T07 – Two-Channel Temperature Transmitter with HART®/Ex/SIL (707080) UL / CRUUS Ex IECEx SIL

  • 2 universal measurement inputs (RTD, TC, Ω, mV)
  • High degree of accuracy (0.1 K with Pt100 sensor)
  • Output 4 to 20 mA (single channel, loop powered)
  • 2 enclosure versions (B-head or DIN rail)
  • HART® 7 protocol
  • SIL 2/3 hardware/software according to IEC 61 508
  • Reliable measurement mode through sensor monitoring and device hardware error detection
  • Optional plug-on display for B-head device version

Ex-i Repeater Power Supply / Input Isolating Amplifier (707530)
Ex-i Repeater Power Supply / Input Isolating Amplifier (707530) Ex SIL UL

  • HART capable
  • SIL2 approval
  • Universal power supply

JUMO PROCESStemp RTD Temperature Probe for Process Technology with Ex Approval (902820)
JUMO PROCESStemp RTD Temperature Probe for Process Technology with Ex Approval (902820) China RoHS-20 Ex IECEx

  • For temperatures from -200 to +600 °C
  • With protection tubes made of stainless steel, titanium, tantalum, Inconel®, and HASTELLOY®
  • Available with two-wire transmitter (4 to 20 mA/HART®) in Ex version
  • II 1/2 G Ex ia IIC T6 ... T1 Ga/Gb¹
  • II 1/2 D Ex ia IIIC T80 ... T400 °C Da/Db¹
  • II 1/2 G Ex ia/d IIC T6 ... T1 Ga/Gb¹
  • II 1/2 D Ex ia/tb IIIC T80 ... T400 °C¹
  • With interchangeable measuring insert (not for Ex basic types)

 

¹ See description

JUMO Wtrans T - RTD Temperature Probe with Wireless Data Transmission (902930)
JUMO Wtrans T - RTD Temperature Probe with Wireless Data Transmission (902930) China RoHS-20 UL / CRUUS Ex FCC

  • For stationary and mobile measurements
  • Measuring ranges: -30 to +260 °C or -200 to +600 °C
  • Radio frequency: 868.4 MHz or 915 MHz
  • Also available with ATEX approval
  • Open air range up to 300 m
  • Configurable transmission interval (1 to 3600 s)

Intrinsically Safe Industrial Measuring Probes for Humidity, Temperature, and Derived Measurands (907025)
Intrinsically Safe Industrial Measuring Probes for Humidity, Temperature, and Derived Measurands (907025) Ex

For measuring relative humidity and temperature

  • The calculations of dew point temperature, absolute humidity, mixing ratio, and wet-bulb temperature are possible as options
  • User-friendly, modular measuring probe concept
  • Intelligent exchange probes that save all calibration coefficients
  • Temperature resistant from -70 to +180 °C (depending on the type of probe)
  • Pressure resistant up to 100 bar (depending on the type of probe)
  • Safe operation of the complete device in potentially explosive areas of category 1G / zone 0 and 1D / zone 20 with protection cover (EU)
  • Traceable to NIST (including certificate)